Delphi
Manufacturer Products Automotive Aftermarket About Delphi

Microelectronics

CMOS

Delphi Open Port Seven Band Equalizer

When controlled by serial data, the Delphi Open Port Graphic Equalizer (OPEQ7) IC provides for seven bands of equalization. The exploitation of transconductance-C circuit techniques minimizes the number of external components required. The seven bands are fully integrated bandpass filters with +/-12dB boost and cut ranges. Band center frequencies are located at 40 Hz, 100 Hz, 250 Hz, 1.6 kHz, 4 kHz, and 12 kHz. Each band is independently controlled via serial data words.

Features

  • Seven bands of tone control and frequency shaping with symmetrical boost and cut
  • Bowing is less than 4dB with all bands boosted at +12dB
  • Automatic input attenuation

Packaging

  • 16-pin 300-mil wide SO

Typical Applications

  • Automotive Radios
  • Home Receivers and Equalizers
  • Portable Stereo Systems

 

Recommended Operating Conditions
CharacteristicSymbolValueUnit
Supply VoltageVdd, Vd8.3 to 8.7V
Digital Input Low VoltageVin0.8V (max)
Digital Input High VoltageVin3.0V (min)
Input Voltage-AudioVin2.37Vrms (max)
Operating Temp. Range, AmbientTa-40 to 85°C

Absolute Maximum Ratings
CharacteristicSymbolValueUnit
Supply VoltageVdd, Vd-0.4 to 9.5V
Digital Input VoltageVin-0.3 to Vd+0.3V
Storage Temp. RangeTstg-65 to +150V
Max. Junction Temp.Tj150V
Max. IC Power Dissipation 350mV

Electrical Performance Characteristics - OPEQ7
CharacteristicsSymbolConditionMinMaxUnit
Adjacent Step Offset VoltageVasoNo Input Signal, Compare each output
between consecutive equalizer steps
-3.03.0mV
Equalizer Step LinearityVeqlFor all EQ Bands
Ex: (Gain(2dB)-Gain(4dB))/Avg. Step
Avg. Step=(Gain(12dB)-Gain(-12dB))/12
0.651.35dB/dB
Equalizer BowingVbowInput=0.5Vrms @ 1.66kHz, Ratio Response
with all bands at +12dB to Response
with only 1.6kHz band at +12dB,
other bands flat
14dB
Total Harmonic DistortionVhd

Input=1.0Vrms @ 1kHz,
All EQ bands=2.0dB


0.1%
NoiseVnWith EQ bands flat 50µV